Opel Omega
since 1993-1999 release
Repair and operation of the car
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
-
3. Repair of engines
+
3.1. SOHC engines of 2,0 liters
-
3.2. DOHC engines of 2,0 liters
3.2.1. Technical characteristics
3.2.2. Check of a compression
3.2.3. Top Dead Point (TDP) of the N1 piston
3.2.4. Cover of camshafts
3.2.5. Pulley of a bent shaft
3.2.6. Covers of a gas-distributing belt
3.2.7. Gas-distributing belt
3.2.8. Natyazhitel of a belt, asterisks and intermediate pulleys
3.2.9. Epiploons of camshafts
3.2.10. Camshafts and pushers
3.2.11. Head of cylinders
3.2.12. Oil pallet
3.2.13. Oil pump
3.2.14. System of an equilibration of a bent shaft (engines since 1998)
3.2.15. Flywheel
3.2.16. Epiploons of a bent shaft
3.2.17. Fastenings of the engine and transmission
+
3.3. 2,5 and 3,0 liters engines
+
3.4. Partition of all petrol engines
+
3.5. 2,0 liters diesel engine
+
3.6. 2,5 liters diesel six-cylinder engine
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. System of ignition
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, half shafts
+
11. Brake system
+
12. Suspension bracket and steering
+
13. Body
+
14. Body electric equipment
Как сделать кабинет на балконе
3.2.9. Epiploons of camshafts
Replacement
PERFORMANCE ORDER
1.
Remove a camshaft asterisk.
2.
Drill two small openings in an old epiploon, screw in in them screws and take an epiploon.
3.
Clean a groove of an epiploon and remove agnails.
4.
Oil a new epiploon and establish it into place.