Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
- 11. Brake system
   11.1. Technical characteristics
   11.2. Brake overlays of forward brakes
   11.3. Brake overlays of back brakes
   11.4. Support of a forward brake
   11.5. Support of a back brake
   11.6. Brake disk
   11.7. Brake shoes of the emergency brake
   11.8. Rope of the emergency brake
   11.9. Lever of the emergency brake
   11:10. Main brake cylinder
   11:11. Tank of brake fluid and sensor of level of liquid
   11:12. Pumping of the brake system
   11:13. Hydraulic tubes and hoses
   11:14. Vacuum hose and valve of the vacuum amplifier of brakes
   11:15. Vacuum amplifier
   11:16. Brake pedal
   11:17. System of anti-blocking of brakes / protivobuksovochny system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



11:16. Brake pedal

GENERAL INFORMATION

Brake pedal elements

1 – fixing arm

2 – clip

3 – nut

4 – washer

5 – returnable spring

6 – axis

7 – pedal

Removal

PERFORMANCE ORDER
1. Remove the finishing panel under an instrument guard and remove an air branch pipe. Disconnect the socket of connection of the switch of fires of a stoplight and unscrew the switch.
2. Disconnect returnable springs of a pedal of a brake.
3. Remove a clip and get a pin, the fixing pusher of the vacuum amplifier to a brake pedal.
4. Turn off a fixing bolt and fixing nuts of an arm of a pedal and remove an arm.
5. Turn off a nut since the end of an axis of a pedal and remove a washer.
6. Remove fixing clips and get a pedal axis. Remove a pedal.

Installation

Installation is carried out to the sequences, the return to removal.