The device, service and repair the Opel Omega - 11.13. Hydraulic tubes and hoses//1993-1999 -

Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
- 11. Brake system
   11.1. Technical characteristics
   11.2. Brake overlays of forward brakes
   11.3. Brake overlays of back brakes
   11.4. Support of a forward brake
   11.5. Support of a back brake
   11.6. Brake disk
   11.7. Brake shoes of the emergency brake
   11.8. Rope of the emergency brake
   11.9. Lever of the emergency brake
   11:10. Main brake cylinder
   11:11. Tank of brake fluid and sensor of level of liquid
   11:12. Pumping of the brake system
   11:13. Hydraulic tubes and hoses
   11:14. Vacuum hose and valve of the vacuum amplifier of brakes
   11:15. Vacuum amplifier
   11:16. Brake pedal
   11:17. System of anti-blocking of brakes / protivobuksovochny system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



1.13. Hydraulic tubes and hoses

Removal and installation

PERFORMANCE ORDER
1. Remove a tank cap with brake fluid and close a mouth a polyethylene film.
2. Lift the car and install it on support.
Forward flexible hose
3. Remove a forward wheel.
4. Turn off a bolt of connection and disconnect a hose from a support.
5. Remove a hose from fastenings.
6. Turn off a nut of connection with a brake tube and remove a hose.
Back flexible hose
7. Remove a hose from fastenings.
8. Turn off nuts of connections with brake tubes and remove a hose.
Brake tubes
9. Turn off fixing nuts of connections and remove a hose from fastenings.
10. Installation is carried out to the sequences, the return to removal.