Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
- 4. Heating system and ventilation
4.1. Technical characteristics
4.2. Radiator
4.3. The cooling fan(s)
4.4. Thermostat
4.5. Pump of cooling liquid
4.6. Broad tank
4.7. Sensor of the temperature indicator
4.8. Elements of heating systems and ventilation
4.9. Heater radiator
4.10. Motor of the delivery fan and consecutive resistor
4.11. Air conditioning system
4.12. Elements of the air conditioning system
4.13. Elements of the electronic control system of climate
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. On all models the sensor is located in a back part of the block of cylinders between heads of cylinders. To open access to the sensor, remove the top part of an inlet collector. |
| 2. Uncover a jellied mouth of a radiator or a broad tank to pit pressure in the engine cooling system. |
| 3. Disconnect a wire from the sensor. |
| 4. Unscrew the sensor and remove a sealing ring. |
|
Installation
Installation is carried out to the sequences, the return to removal.
|
|