Opel Omega
since 1993-1999 release
Repair and operation of the car
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
+
3. Repair of engines
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. System of ignition
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, half shafts
+
11. Brake system
-
12. Suspension bracket and steering
12.1. Technical characteristics
12.2. Rack of a forward suspension bracket
12.3. Disorder of forward wheels
12.4. Lower lever of a forward suspension bracket
12.5. Spherical hinge of the lower lever of a forward suspension bracket
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Connecting links of the stabilizer of cross stability
12.8. Rotary pin
12.9. Nave and bearings of a forward wheel
12:10. Cross-piece of a forward suspension bracket
12:11. Shock-absorber of a back suspension bracket
12:12. Lever of a back suspension bracket
12:13. Springs of a back suspension bracket
12:14. Stabilizer of cross stability of a back suspension bracket
12:15. Cross drafts of a back suspension bracket
12:16. System of adjustment of height of a back suspension bracket
12:17. Back suspension bracket
12:18. Cross-piece of a back suspension bracket
12:19. Fastenings of a cross-piece of a back suspension bracket
12:20. Nave and bearings of a back wheel
12:21. Steering wheel
12:22. Steering column
12:23. Lock of a steering column / lock of ignition
12:24. Steering mechanism
12:25. Steering drafts
12:26. Steering bipod
12:27. Pump of system of the hydraulic booster of steering
12:28. Adjustment of wheels and angles of turns
+
13. Body
+
14. Body electric equipment
12.7. Connecting links of the stabilizer of cross stability
Removal
PERFORMANCE ORDER
1.
Remove the corresponding forward wheel.
2.
Turn off the top nut.
3.
Disconnect a link from a suspension bracket rack.
4.
Disconnect a link from the stabilizer of cross stability.
5.
Hold a fixing bolt of a connecting link if it is necessary.
Installation
PERFORMANCE ORDER
1.
Installation is carried out to the sequences, the return to removal.
2.
Tighten fixing nuts till the required inhaling moment.