Opel Omega

since 1993-1999 release

Repair and operation of the car

автосервис круглосуточный нижний новгород
лейка настенная для душа


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Lower lever of a forward suspension bracket
   12.5. Spherical hinge of the lower lever of a forward suspension bracket
   12.6. Stabilizer of cross stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12:10. Cross-piece of a forward suspension bracket
   12:11. Shock-absorber of a back suspension bracket
   12:12. Lever of a back suspension bracket
   12:13. Springs of a back suspension bracket
   12:14. Stabilizer of cross stability of a back suspension bracket
   12:15. Cross drafts of a back suspension bracket
   12:16. System of adjustment of height of a back suspension bracket
   12:17. Back suspension bracket
   12:18. Cross-piece of a back suspension bracket
   12:19. Fastenings of a cross-piece of a back suspension bracket
   12:20. Nave and bearings of a back wheel
   12:21. Steering wheel
   12:22. Steering column
   12:23. Lock of a steering column / lock of ignition
   12:24. Steering mechanism
   12:25. Steering drafts
   12:26. Steering bipod
   12:27. Pump of system of the hydraulic booster of steering
   12:28. Adjustment of wheels and angles of turns
+ 13. Body
+ 14. Body electric equipment



12:17. Back suspension bracket

Removal

PERFORMANCE ORDER
1. Remove intermediate and back sections of the exhaust system.
2. Remove the balance weight of ropes of the emergency brake.
3. Remove supports of brakes.
4. Remove ABS sensors.
5. Disconnect the driveshaft from a flange of the main transfer.
6. Establish a thick board under levers of a suspension bracket and establish a jack under the center of a board.
7. Turn off bolts, the fixing arms of the main transfer to a body.
8. Turn off bolts of the lower fastenings of shock-absorbers.
9. Remove springs of a suspension bracket and laying.
10. Turn off three fixing bolts (A) and the central bolt (V) of forward fastening of a cross-piece of a suspension bracket and remove a back suspension bracket.

Installation

Installation is carried out to the sequences, the return to removal.