Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Lower lever of a forward suspension bracket
   12.5. Spherical hinge of the lower lever of a forward suspension bracket
   12.6. Stabilizer of cross stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12:10. Cross-piece of a forward suspension bracket
   12:11. Shock-absorber of a back suspension bracket
   12:12. Lever of a back suspension bracket
   12:13. Springs of a back suspension bracket
   12:14. Stabilizer of cross stability of a back suspension bracket
   12:15. Cross drafts of a back suspension bracket
   12:16. System of adjustment of height of a back suspension bracket
   12:17. Back suspension bracket
   12:18. Cross-piece of a back suspension bracket
   12:19. Fastenings of a cross-piece of a back suspension bracket
   12:20. Nave and bearings of a back wheel
   12:21. Steering wheel
   12:22. Steering column
   12:23. Lock of a steering column / lock of ignition
   12:24. Steering mechanism
   12:25. Steering drafts
   12:26. Steering bipod
   12:27. Pump of system of the hydraulic booster of steering
   12:28. Adjustment of wheels and angles of turns
+ 13. Body
+ 14. Body electric equipment


Как подготовиться к магнитной буре

12:27. Pump of system of the hydraulic booster of steering

MODELS WITH THE 4-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Take off a driving belt.
2. Disconnect a tube and a hose from the pump, turn off three fixing bolts and remove the pump.

Installation

Installation is carried out to the sequences, the return to removal.

MODELS WITH THE 6-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Discharge air conditioning system if it is established.
2. Take off a driving belt.
3. Turn off fixing bolts and remove a pump pulley.
4. Disconnect a tube and a hose from the pump.
5. Turn off the fixing screw and disconnect a weight wire from a fixing arm of the pump.
6. Remove a fixing arm from below of the pump.
7. Remove the conditioner compressor from a fixing arm of the pump.
8. Turn off three fixing bolts and remove a fixing arm together with the pump.
9. Remove the pump from a fixing arm.

Installation

Installation is carried out to the sequences, the return to removal.