Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
- 9. Transmissions
   + 9.1. Mechanical transmission
   - 9.2. Automatic transmission
      9.2.1. Technical characteristics
      9.2.2. Transmission liquid
      9.2.3. Gear shifting mechanism
      9.2.4. Gear shifting lever
      9.2.5. Epiploons
      9.2.6. Radiator of transmission liquid
      9.2.7. Electric elements of the control system of the transmission
      9.2.8. Automatic transmission
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



9.2.5. Epiploons

DRIVESHAFT FLANGE EPIPLOON

Replacement

PERFORMANCE ORDER
1. Disconnect a forward part of the driveshaft from a flange of the transmission and remove the shock-absorber. If necessary completely remove the driveshaft.
2. Stop the conducted shaft.
3. Twist a nut and remove a flange.
4. Take an epiploon from a transmission casing.
5. Examine a flange on existence of damages, if necessary replace it.
6. Clean an epiploon groove, a carving of a shaft and a nut.
7. Grease a new epiploon with lubricant and establish it into place.
8. Establish a driveshaft flange.
9. Tighten a nut.

EPIPLOON OF THE SWITCHING DRAFT

Replacement

PERFORMANCE ORDER
1. Remove the switch of provisions of the lever of gear shifting.
2. Take an epiploon by means of the small screw-driver.
3. Establish a new epiploon.