Opel Omega

since 1993-1999 release

Repair and operation of the car


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
- 10. Main transfer, half shafts
   10.1. Technical characteristics
   10.2. Main transfer
   10.3. Damping plugs of the main transfer
   10.4. Laying of a back cover of the main transfer
   10.5. Epiploon of the leading gear wheel of the main transfer
   10.6. Epiploons of bearings of half shafts
   10.7. Half shaft
   10.8. Boots of a half shaft and external CV JOINT
   10.9. Driveshaft
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



10.3. Damping plugs of the main transfer


FORWARD PLUG

Replacement

PERFORMANCE ORDER
1. Establish a support under the main transfer and disconnect sockets of connection of ABS sensors.
2. Turn off fixing bolts and omit the main transfer a little.
3. Turn off fixing bolts and remove a fixing arm of the plug. Replace the plug.

BACK PLUGS

Installation of new plugs

The distance of I between inner edges plugs has to equal 300–302 mm.

Replacement

PERFORMANCE ORDER
1. Remove the main transfer.
2. Remove the fuel filter from fastenings and remove it aside.
3. Squeeze out plugs from a cross-piece of a back suspension bracket.
4. Napressuyte new plugs so that the distance between their inner edges equaled 300–302 mm.
5. Establish the main transfer into place.