Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Cars with petrol engines
      2.1.1. Technical characteristics
      2.1.2. Current maintenance
      + 2.1.3. Through 8000 km of a run or each 6 months
      - 2.1.4. Through 16 000 km of a run or each 12 months
         2.1.4.1. Light and alarm equipment
         2.1.4.2. Forward and back brakes
         2.1.4.3. Driving belt
         2.1.4.4. Hoses and connections
         2.1.4.5. Corrosion-resistant coating of a body
         2.1.4.6. Emergency brake
         2.1.4.7. Suspension bracket and steering
         2.1.4.8. Moments of an inhaling of bolts of fastening of wheels
         2.1.4.9. Adjustment of headlights of head light and front position lamps
         2.1.4.10. Check of the car in road conditions
         2.1.4.11. Adjustment of wheels
         2.1.4.12. System of production of the fulfilled gases
      + 2.1.5. Through 32 000 km of a run or each 2 years
      + 2.1.6. Through 64 000 km of a run or each 4 years
      + 2.1.7. Through 112 000 km of a run or each 7 years
      + 2.1.8. Each 2 years irrespective of a run
   + 2.2. Cars with diesel engines
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



2.1.4.3. Driving belt

Check

The driving belt needs to be examined regularly on all length and if it is worn-out or damaged, it needs to be replaced.

PERFORMANCE ORDER
1. On the 2,0 l engine check that the index of the lever of a natyazhitel (2) was located between an emphasis (1 and 3). Replace a belt if it is worn-out or the lever of a natyazhitel concerns an emphasis.
2. On the 2,5 and 3,0 l engines check that the emphasis (1) was between ledges (2) on the lever. Replace a belt if it is worn-out or the lever of a natyazhitel concerns an emphasis.

Replacement

PERFORMANCE ORDER
2,0 l engine
1. Take aside a pulley of a natyazhitel, having put on a key the central bolt of a pulley, and take off a belt. Block a natyazhitel in this situation and put on a new belt. Release a natyazhitel.
2,5 and 3,0 l engines
2. Pick up an air chamber and the forward phone of system of an intake of air.
3. Take aside a pulley of a natyazhitel, having put on a key the central bolt of a pulley, and take off a belt. Put on a new belt and release a natyazhitel.