The device, service and repair the Opel Omega - 14.24. Elements of system of airbags of safety//1993-1999 -

Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in system of electric equipment
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting fixtures)
   14.6. Bulbs (internal lighting)
   14.7. External lighting fixtures
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14:10. Elements of an instrument guard
   14:11. Hours / multipurpose display
   14:12. Lighter
   14:13. System of adjustment of xenon headlights
   14:14. Horns of a sound signal
   14:15. Levers of screen wipers
   14:16. Engine, connecting mechanism of a screen wiper of a windshield
   14:17. Engine of a screen wiper of back glass
   14:18. Washers of wind glass / back glass / headlights of head light
   14:19. Radio receiver / cassette / CD player
   14:20. Loudspeakers
   14:21. Radio antenna
   14:22. System of the anticreeping alarm system and immobilizer of the engine
   14:23. System of airbags of safety
   14:24. Elements of system of airbags of safety
   14:25. System elements cruise control
   + 14:26. Schemes of electric equipment



14:24. Elements of system of airbags of safety

MODULE OF THE AIRBAG OF SAFETY OF THE DRIVER

Removal

PERFORMANCE ORDER
Models till 1996 of release
1. Deactivate the safety airbag module.
2. Turn off fixing screws, disconnect the socket of connection and remove the module.
Models since 1996 of release
3. Deactivate the safety airbag module.
4. Turn off fixing screws from a reverse side of a steering wheel.
5. Disconnect the connection socket.
6. Remove the safety airbag module.

Installation

Installation is carried out to the sequences, the return to removal.

MODULE OF THE AIRBAG OF SAFETY OF THE PASSENGER

Removal

PERFORMANCE ORDER
1. Deactivate the safety airbag module.
2. Remove a glove compartment.
3. Remove the finishing panel from the left end face of the dashboard.
4. Remove ventilating grates and the panel of finishing.
5. Remove the lower panel of finishing.
6. Turn off and remove a fixing bolt of a casing.
7. Remove a casing.
8. Turn off fixing bolts and get the module.
9. Disconnect the socket of connection and remove the module.

Installation

Installation is carried out to the sequences, the return to removal.

SIDE MODULE OF THE AIRBAG OF SAFETY

Removal

For performance of this operation it is recommended to address experts.

THE CONTACT MODULE OF THE AIRBAG OF SAFETY (ON THE STEERING COLUMN)

Removal

PERFORMANCE ORDER
1. Remove a steering wheel.
2. Remove casings of a steering column.
3. Remove a fixing plate and disconnect the connection socket.
4. Release fixing clips.
5. Remove the contact module.

Installation

PERFORMANCE ORDER
Installation is carried out to the sequences, the return to removal. For adjustment of the module press a latch from above of the module and rotate the central part of the module counterclockwise, yet you will not feel resistance. Then turn it back on 2,5 turns and combine adjusting tags (are specified by shooters).

ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Disconnect the connection socket, turn off fixing nuts and remove an electronic control unit.

Installation

Installation is carried out to the sequences, the return to removal.

SENSOR OF SIDE CRASH

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a forward door.
2. Remove a protective film.
3. Turn off fixing screws and remove the sensor.
4. Disconnect the connection socket.

Installation

PERFORMANCE ORDER
Installation is carried out to the sequences, the return to removal. Check that the membrane was reliably pasted and did not pass air.