Opel Omega

since 1993-1999 release

Repair and operation of the car

алиса проституток | порно в иркуте


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Maintenance and repair
   13.3. Repair of insignificant damages of a body
   13.4. Repair of considerable damages of a body
   13.5. Loops and locks
   13.6. Windshield and motionless glasses
   13.7. Bumpers
   13.8. Front grille
   13.9. Cowl and basic racks
   13:10. Cowl lock rope
   13:11. Cowl lock spring
   13:12. Doors
   13:13. Internal panel of finishing of a door
   13:14. Door handles and locks
   13:15. Window regulators and glasses
   13:16. Back side glass (models with a body like Versatile person)
   13:17. Lock of the gate of the fuel tank and rope of the lock
   13:18. Trunk lid and basic racks
   13:19. Trunk lid lock elements
   13:20. Back door and basic racks
   13:21. Elements of the lock of a back door
   13:22. Elements of system of the central lock
   13:23. Elements of power windows
   13:24. External rear-view mirrors
   13:25. A windshield and the fixed glasses
   13:26. Elements of the top hatch
   13:27. External elements of a body
   13:28. Seats
   13:29. Elements of seat belts
   13:30. Internal panels of finishing
   13:31. Central console
   13:32. Glove compartment
   13:33. Dashboard
+ 14. Body electric equipment



13:22. Elements of system of the central lock

DOOR WIRE

Removal and installation

PERFORMANCE ORDER
1. Remove the lock of the corresponding door.
2. Turn off fixing screws (are specified by shooters).
3. Disconnect draft (are specified by shooters) and remove the drive.
4. Installation is carried out to the sequences, the return to removal.

CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Remove the finishing panel on the right side under the dashboard.
2. Disconnect the socket of connection of the block.
3. Turn off fixing nuts and remove the block.

Installation

Installation is carried out to the sequences, the return to removal.

TRUNK LID LOCK DRIVE

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a cover.
2. Disconnect draft from the drive.
3. Disconnect the connection socket, turn off fixing bolts.
4. Remove the drive.

Installation

Installation is carried out to the sequences, the return to removal.

DRIVE OF THE LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a door.
2. Disconnect draft from the lock.
3. Turn off fixing bolts.
4. Disconnect the socket of connection and remove the drive.

Installation

Installation is carried out to the sequences, the return to removal.

DRIVE OF THE LOCK OF THE GATE OF THE FUEL TANK

Removal

PERFORMANCE ORDER
1. Remove the finishing panel on the right side of a luggage carrier.
2. Disconnect the socket of connection of the drive.
3. Turn off two fixing bolts.
4. Remove the drive and a fixing arm.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. Check that draft passed through the plug in a body.
3. Check that draft was connected to a lock plate of the gate.