Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Maintenance and repair
   13.3. Repair of insignificant damages of a body
   13.4. Repair of considerable damages of a body
   13.5. Loops and locks
   13.6. Windshield and motionless glasses
   13.7. Bumpers
   13.8. Front grille
   13.9. Cowl and basic racks
   13:10. Cowl lock rope
   13:11. Cowl lock spring
   13:12. Doors
   13:13. Internal panel of finishing of a door
   13:14. Door handles and locks
   13:15. Window regulators and glasses
   13:16. Back side glass (models with a body like Versatile person)
   13:17. Lock of the gate of the fuel tank and rope of the lock
   13:18. Trunk lid and basic racks
   13:19. Trunk lid lock elements
   13:20. Back door and basic racks
   13:21. Elements of the lock of a back door
   13:22. Elements of system of the central lock
   13:23. Elements of power windows
   13:24. External rear-view mirrors
   13:25. A windshield and the fixed glasses
   13:26. Elements of the top hatch
   13:27. External elements of a body
   13:28. Seats
   13:29. Elements of seat belts
   13:30. Internal panels of finishing
   13:31. Central console
   13:32. Glove compartment
   13:33. Dashboard
+ 14. Body electric equipment


https://glamorlady.ru: упражнение на позвоночник

13:14. Door handles and locks

INTERNAL HANDLE

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a door and a protective film.
2. Shift the handle forward and remove it from a door.
3. Turn the handle counterclockwise and disconnect draft of the lock.

Installation

Installation is carried out to the sequences, the return to removal.

EXTERNAL HANDLE OF THE FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a door and a protective film.
2. On models with side safety cushions remove the sensor of blow and a fixing arm.
3. Turn off fixing nuts of the handle (are specified by shooters).
4. Remove the handle from a door. Disconnect the connection socket if it is necessary.
5. Remove a clip.
6. Disconnect draft of the lock.
7. Remove the handle.

Installation

Installation is carried out to the sequences, the return to removal.

EXTERNAL HANDLE OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing and a protective film.
2. Turn off fixing screws.
3. Remove the protective panel.
4. Turn off fixing nuts.
5. Remove a fixing plate.
6. Disconnect draft of the lock from the handle.
7. Remove the handle.

Installation

Installation is carried out to the sequences, the return to removal.

DRUM OF THE LOCK OF THE FORWARD DOOR (MODEL WITH THE ORDINARY REEL OF THE LOCK)

Removal

PERFORMANCE ORDER
1. Remove the external handle of a door.
2. Insert a key into the lock and turn it to the right.
3. Remove a lock ring and get a drum behind the lock.

Installation

Installation is carried out to the sequences, the return to removal.

DRUM OF THE LOCK OF THE FORWARD DOOR (MODELS WITH WE SVOBODNOVRASHCHAYUSHCHITSYA BY THE DRUM OF THE LOCK)

Elements of a drum of the lock of a forward door (models with we svobodnovrashchayushchitsya by a drum of the lock)

1. Pin
2. Casing
3. Drum of the lock
4. Plug
5. Ball
6. Coupling
7. Arm
8. Washer
9. Support and lever
10. Spring
11. Spring

Removal

PERFORMANCE ORDER
1. Remove the external handle of a door.
2. Mark the provision of installation of the reel and beat out a lock pin.
3. Remove a drum of the lock.

Installation

Installation is carried out to the sequences, the return to removal.

LOCK OF THE FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing and a protective film from a door.
2. Remove the sensor of blow and a fixing arm if it is necessary.
3. Remove the external handle of a door.
4. Disconnect the socket of connection of the central lock.
5. Disconnect drafts from the lock.
6. Turn off three fixing screws and remove the lock.

Installation

Installation is carried out to the sequences, the return to removal.

LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. Remove the internal panel of finishing of a door and a protective film.
2. Remove the external handle of a door.
3. Disconnect drafts from the lock.
4. Disconnect the connection socket.
5. Turn off fixing screws (are specified by shooters).
6. Remove the lock.

Installation

Installation is carried out to the sequences, the return to removal.