Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Maintenance and repair
   13.3. Repair of insignificant damages of a body
   13.4. Repair of considerable damages of a body
   13.5. Loops and locks
   13.6. Windshield and motionless glasses
   13.7. Bumpers
   13.8. Front grille
   13.9. Cowl and basic racks
   13:10. Cowl lock rope
   13:11. Cowl lock spring
   13:12. Doors
   13:13. Internal panel of finishing of a door
   13:14. Door handles and locks
   13:15. Window regulators and glasses
   13:16. Back side glass (models with a body like Versatile person)
   13:17. Lock of the gate of the fuel tank and rope of the lock
   13:18. Trunk lid and basic racks
   13:19. Trunk lid lock elements
   13:20. Back door and basic racks
   13:21. Elements of the lock of a back door
   13:22. Elements of system of the central lock
   13:23. Elements of power windows
   13:24. External rear-view mirrors
   13:25. A windshield and the fixed glasses
   13:26. Elements of the top hatch
   13:27. External elements of a body
   13:28. Seats
   13:29. Elements of seat belts
   13:30. Internal panels of finishing
   13:31. Central console
   13:32. Glove compartment
   13:33. Dashboard
+ 14. Body electric equipment



13:13. Internal panel of finishing of a door

FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove the regulator of provision of a rear-view mirror.
3. Remove a casing of the internal handle.
4. Remove the panel from the handle of closing of a door.
5. Remove caps.
6. Turn off fixing screws.
7. Remove the handle of closing of a door.
8. Remove the window regulator handle.
9. Remove a clip and remove the button of locking of a door.
10. Turn off the fixing screw.
11. Remove the panel of finishing of the button.
12. Remove caps.
13. Turn off the lower and forward fixing screws.
14. Remove the panel of finishing of a door.
15. If it is necessary, remove a protective film.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. On models with side safety cushions check that a protective film was it is densely pasted to a door and did not pass air.

BACK DOOR

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove an ashtray.
3. Remove the panel of the handle of opening of a door.
4. Remove the panel from the handle of closing of a door.
5. Remove a fixing clip of the button of locking of a door.
6. Remove the button of locking of a door.
7. Turn off the fixing screw of the panel of finishing.
8. Remove the finishing panel.
9. Turn off fixing screws of the handle of closing of a door.
10. Remove the handle of closing of a door.
11. Disconnect the socket of connection of a window regulator if it is necessary.
12. Remove the window regulator handle.
13. Remove a lamp of illumination of powder and disconnect the connection socket.
14. Turn off fixing screws of the panel of finishing.
15. Remove the finishing panel.
16. Disconnect the socket of connection of the loudspeaker.
17. Remove a protective film if it is necessary.

Installation

Installation is carried out to the sequences, the return to removal.